Sucking pump

The material of the cutter pump is wear-resistant alloy, which has good wear resistance and corrosion resistance. It has large over-flow passage and strong discharge capacity. It can pass large solid particles, and the water and land excavator works with the cutter pump. The solid material transportation efficiency is increased by three times. It is used in urban river improvement projects such as urban dredging and sewage treatment. The use range of the cutter pump:

  • River sand pumping, sea bottom sand discharge, coastal reclamation sand absorption, fish pond mud cleaning, etc.
  • Concentrator tailings transportation, coal mine slag removal, power plant fly ash transportation, etc.
  • The sedimentation tank transports mud sand, sand sinking pool, clear water tank, ore slurry removal.
  • Phosphorus chemical high-temperature slurry conveying, boiler high-temperature high-temperature slurry, heat-resistant iron oxide skin water cleaning.
  • Medium transportation such as gold ore, extraction of iron ore, extraction of quartz sand and tailings.
  • Municipal pipelines, water conservancy projects, river dredging, sand pumping and reclamation, etc. dredging and sand absorption.

Long arm

Because the standard arm length of the excavator cannot meet certain working conditions, more and more excavators use the extension arm to fill the gap. The excavator extension arm is divided into two sections, three sections and four sections. At present, various environmental protection projects, urban subway construction, port river dredging and pollution control projects are also everywhere, so the market demand for long arm excavators is very large. Briefly introduce the scope of application of the two-stage extension arm excavator:

  • Two-stage long-arm excavator can excavate earthwork for foundation pit and steep slope excavation, river embankment, slope repairing project
  • It is used for municipal pipe network, buried pipe operation, repairing subways and digging tunnels for long-distance excavation.
  • The ditch is dredged, the river is dredged, the tail water of the hydropower station is dredged, the excavator has long arm, and the deep river channel is silt and gravel is cleaned.
  • The long-arm excavator can also be used in other special conditions that have special requirements for depth, width and height.
  • The bottom of the pump has a stirring impeller to prevent large solids from clogging the pump and allowing the solids to mix well with the liquid for easier handling.
  • This pump can handle solid materials with a maximum particle size of 50mm, and the concentration of thick liquid can be up to 30~40%.
  • The smaller volume is convenient for transportation, which greatly reduces the transportation cost and improves the use efficiency.

Long arm

Because the standard arm length of the excavator cannot meet certain working conditions, more and more excavators use the extension arm to fill the gap. The excavator extension arm is divided into two sections, three sections and four sections. At present, various environmental protection projects, urban subway construction, port river dredging and pollution control projects are also everywhere, so the market demand for long arm excavators is very large. Briefly introduce the scope of application of the two-stage extension arm excavator:

  • Two-stage long-arm excavator can excavate earthwork for foundation pit and steep slope excavation, river embankment, slope repairing project
  • It is used for municipal pipe network, buried pipe operation, repairing subways and digging tunnels for long-distance excavation.
  • The ditch is dredged, the river is dredged, the tail water of the hydropower station is dredged, the excavator has long arm, and the deep river channel is silt and gravel is cleaned.
  • The long-arm excavator can also be used in other special conditions that have special requirements for depth, width and height.
  • The bottom of the pump has a stirring impeller to prevent large solids from clogging the pump and allowing the solids to mix well with the liquid for easier handling.
  • This pump can handle solid materials with a maximum particle size of 50mm, and the concentration of thick liquid can be up to 30~40%.
  • The smaller volume is convenient for transportation, which greatly reduces the transportation cost and improves the use efficiency.

Pile driver

The amphibious excavator cooperates with the large plate heightening and piling hammer operation to expand the scope of use of the excavator. It can travel under the condition of 3 meters water depth and is widely used in piling operations in swamp and seaside water environment.

Pile driver

The amphibious excavator cooperates with the large plate heightening and piling hammer operation to expand the scope of use of the excavator. It can travel under the condition of 3 meters water depth and is widely used in piling operations in swamp and seaside water environment.