Excavator precautions when working in swamps and river beaches

The problem that the excavator should pay attention to when working on the excavator is dredging. When digging trenches, you must re-dig it in one place. If you are not sure, let the construction crew test a few points. If he does not measure, you will slowly Dig, go out and go to the bottom of the ditch to see the slope. If you must re-dig the long distance, you must first fill the trench back, which is very troublesome but safe!

Driving on soft ground When excavators work on soft ground such as swamps and river beaches, they should first use the bucket to test whether the ground can withstand the weight of the excavator. If you forget this process, there may be serious consequences unless you are driving an amphibious excavator. Although the excavator is designed for crawler belts and has a large area of ​​contact with the ground, the accident that the excavator is caught in the mud can also occur from time to time! Just note that this can be avoided.

To avoid the excavator being trapped when working on soft ground such as swamps or river beaches, you should pay attention to these:

1, first try with a bucket.

2, take more straight and turn less. Wetland Excavator Don’t worry if the excavator is stuck in the mud. Don’t try to climb out with a set of climbing methods, it will only get deeper and deeper.

3. Don’t stay in the same place for a long time.

There are many ways to save:

1, if the mud is infinitely deep, it is to rent a few iron plates or road substrates, and press it under the track, you can easily get out of trouble.

2, if the trap is not very deep, first hollow out the two tracks and try again.

3, if you still can’t come out, first try to see how deep the mud is. If it is not very deep, just dig the mud in front and open the way for yourself. Slowly approach the hard ground on the shore.

Add a Comment

Your email address will not be published. Required fields are marked *